Dantherm Group
Dantherm

Dantherm CDP 40-50-70T – swimming pool dehumidifiers

Wall-mounted swimming pool dehumidifiers

The CDP 40T-50T-70T condensation dehumidifiers have been designed for through-the-wall mounting in your swimming pool plant room. Designed as highly durable units, the dehumidifiers come with an intuitive user interface and monitoring options for easy operation. Combined with very efficient fans and compressors this secures efficient operation and significant energy savings.

The range is also available in wall-mounted or floor-standing versions.

Dantherm CDP 40-50-70T – swimming pool dehumidifiers
Dantherm CDP 40-50-70T – swimming pool dehumidifiers
Dantherm CDP 40T – swimming pool dehumidifiers
Dantherm CDP 40T – swimming pool dehumidifiers
Dantherm CDP-T swimming pool dehumidifier video
Dantherm CDP-T swimming pool dehumidifier video
Dantherm CDP 70T – swimming pool dehumidifiers
Dantherm CDP 70T – swimming pool dehumidifiers
Dantherm CDP 40T grilles
Dantherm CDP 40T grilles
Dantherm CDP T installation
Dantherm CDP T installation
Dantherm CDP 40T spa installation
Dantherm CDP 40T spa installation
Dantherm CDP 40T swimming pool installation
Dantherm CDP 40T swimming pool installation

Key features

  • Low sound level
  • Low energy consumption
  • Evaporator and condenser coils are epoxy coated
  • Metal parts are powder coated before assembly
  • Optional remote control
  • Integrated control of heating and humidity (ON/OFF)
  • BMS Communication (Modbus RS485)

Dantherm CDP 40-50-70T dehumidifiers for humidity control in indoor swimming pools are developed with a focus to quality, functionality and energy saving. Highly efficient fans and compressors, combined with a new advanced remote control and control options, contribute to cost-efficient operation and significant energy savings.

The CDP-T is an energy efficient through the wall dehumidifier for mounting in adjoining locations. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which falls into the drip tray and then is led from the drip tray to a drain. The cold, dry air is then passed over the condenser coil where it is re-heated, before leaving the unit at a temperature, which is approx. 5°C higher than at the inlet. Built in electronic hygrostat and thermostat. Active, demand controlled defrosting.

Product specifications

Specifications Units CDP 40T
Operating temperature range
°C
10-36
Operating humidity range
% RH
40-100
Dehumidification @ 28°C/60% RH
l/24h
34
SEC @ 28°C/60% RH
kWh/l
0.47
Air flow
m³/h
400
Sound pressure level
dB(A)
43
Power supply
V/Hz
230/1ph/50
R407c gas weight/CO2 equivalent
kg/t
0.7/1.24
Product size (w x d x h)
mm
998 x 304 x 700
Weight
kg
57.5
Specifications Units CDP 50T
Operating temperature range
°C
10-36
Operating humidity range
% RH
40-100
Dehumidification @ 28°C/60% RH
l/24h
52
SEC @ 28°C/60% RH
kWh/l
0.48
Air flow
m³/h
680
Sound pressure level
dB(A)
44
Power supply
V/Hz
230/1ph/50
R407c gas weight/CO2 equivalent
kg/t
0.9/1.60
Product size (w x d x h)
mm
1148 x 304 x 700
Weight
kg
66.0
Specifications Units CDP 70T
Operating temperature range
°C
10-36
Operating humidity range
% RH
40-100
Dehumidification @ 28°C/60% RH
l/24h
69
SEC @ 28°C/60% RH
kWh/l
0.43
Air flow
m³/h
900
Sound pressure level
dB(A)
47
Power supply
V/Hz
230/1ph/50
R407c gas weight/CO2 equivalent
kg/t
1.2/2.13
Product size (w x d x h)
mm
1483 x 304 x 700
Weight
kg
77.5