SET i-Silent 10-15 – inverter swimming pool heat pumps
SET range of inverter heat pumps are specifically designed for heating small and medium sized outdoor swimming pools and spas.
Offering a very high heat output using very little energy, the i-Silent range stands out for its environmental friendliness and operational cost effectiveness. In fact, their energy consumption is approximately half that of traditional on/off heat pumps and 1/10 of that of gas or electrical pool heaters.
In addition, it does not required a fuel storage tank or high-capacity electrical supply. It does not emit any CO2 gases, fumes or smells.
Specifically designed for operation down to -10°C, the i-Silent heat pumps will extend your pool season by several months too.
Rapid installation, flexible operation
The i-Silent heat pumps are built with easy installation in mind. In terms of operation, you'll note that the highly efficcient units are very quiet, reliable and safe to use.
SET i-Silent 10 – inverter swimming pool heat pumps
|
SET i-Silent controls
|
Key features
-
Inverter heat pump
-
Average COP 9.7 = 2 x more efficient than on/off heat pumps
-
Eco-friendly refrigerant R32 = 675 GWP, (Global Warming Potential)
-
Increased range of performance ratings from 10.2 to 14.1kW
-
9-11 dB(A) sound reduction compared to an equivalent on/off heat pump, with ‘Whisper Mode’
-
Multifunction operation functions can be set to heating, heat/cool and cooling
-
Soft start-up
-
Robust housing made of eloxated aluminium
-
Built-in Wi-Fi module
-
Winter protection cover included
New refrigerant gas
-
Has a low GWP (675)
-
Zero ozone depleting potential (ODP)
-
Is F-gas phase-down compliant
-
Requires less refrigerant volume per kW
-
Is easier to reuse and recycle
Benefits
-
All year heating for outdoor and indoor pools
-
Can operate down to -10°C ambient air temperature
-
High heating performance at lower temperatures – ideal for quick pool heat up at the start of the season
-
Pool heating at altitude
-
Higher cooling capacity
-
Most efficient models – highest COP
-
PoolTherm App is available on Android and iOS
Applications
-
Outdoor pools
-
Private pools
-
Spa pools
-
Therapy and wellness pools
Product specifications
Specifications | Units | i-Silent 10 |
---|---|---|
Operating temperature range |
°C
|
-10-40
|
Water temperature range |
°C
|
12-40
|
Performance – air 15°C 70% RH, water 26°C | ||
Heating capacity |
kW
|
10.2
|
Performance – air 5 °C, 70 % RH, water 10 °C | ||
Heating capacity |
kW
|
7.4
|
Performance – air 35 °C, 80 % RH, water 28 °C | ||
Cooling capacity |
kW
|
6.5
|
Power supply |
V/Hz
|
230/1ph/50
|
Rated input power |
kW
|
2.2
|
Rated input current |
A
|
10
|
Maximum input current |
A
|
13.5
|
Water flow |
m³/h
|
4-6
|
Water connection |
DN/d
|
40/50
|
Compressor |
|
Inverter
|
Condenser |
|
Titanium
|
R32 gas weight and CO2 equivalent |
kg
|
0.9/0.61
|
Sound level @ 10m |
dB(A)
|
20.5-24.0
|
Sound level @ 1m |
dB(A)
|
40-45
|
Product size (w x d x h) |
mm
|
980 x 360 x 680
|
Weight |
kg
|
55
|
Specifications | Units | i-Silent 15 |
---|---|---|
Operating temperature range |
°C
|
-10-40
|
Water temperature range |
°C
|
12-40
|
Performance – air 15°C 70% RH, water 26°C | ||
Heating capacity |
kW
|
14.1
|
Performance – air 5 °C, 70 % RH, water 10 °C | ||
Heating capacity |
kW
|
9.5
|
Performance – air 35 °C, 80 % RH, water 28 °C | ||
Cooling capacity |
kW
|
9.3
|
Power supply |
V/Hz
|
230/1ph/50 or 400/3ph/50
|
Rated input power |
kW
|
3.1
|
Rated input current |
A
|
13.6/3 x 4.5
|
Maximum input current |
A
|
17.0 /3 x 5.8
|
Water flow |
m³/h
|
7-10
|
Water connection |
DN/d
|
40/50
|
Compressor |
|
Inverter
|
Condenser |
|
Titanium
|
R32 gas weight and CO2 equivalent |
kg
|
1.2/0.81
|
Sound level @ 10m |
dB(A)
|
20.5-33.5
|
Sound level @ 1m |
dB(A)
|
40-53
|
Product size (w x d x h) |
mm
|
980 x 420 x 780
|
Weight |
kg
|
70
|