Application: Penetrox is supplied as a ready-to-use solution and applied with a ULV sprayer.

Federal Institute for Occupational Safety and Health listed, registration number: N-70799.
Use biocides with care. Dangerous goods: UN 3107. Best before 24 months after date of manufacture.!

WARNING! Causes severe skin burns and eye damage. Keep safely out of reach of children. If medical advice is needed, have packaging or label at hand. Wear protective gloves/protective clothing/eye protection/face protection. Do not breathe mist/vapour/aerosol. If on skin (or hair): Remove all contaminated, soaked clothing immediately. Wash skin with water/shower. Keep locked up. Dispose of contents/container to approved waste disposal or municipal collection point.

Heylo disinfectant and odour eliminator made by Alron: for professional fire and water damage cleaners.

Note: Read the safety data sheet and technical data sheet before use!

Frequently asked questions (FAQs) on the subject of disinfection

Are your active substances only suitable for disinfection?
No. They can be used for disinfection, odour neutralisation and also mould remediation.

Do your active substances eliminate viruses?
Yes. All Heylo disinfecting agents have a limited virucidal effect.

Can Heylo oxidising agents be used for hand disinfection?
No. The products are not suitable for use on humans or animals.

Are your active ingredients approved for mould remediation?
Yes. All biocide products must be approved by the BAUA (Federal Institute for Occupational Safety and Health).

Which mould treatment do I use to kill spores on wallpaper?
For superficial, visible mould infestation, the agents ODOX and ALRON CITROX are suitable. However, as soon as the wallpaper has grown through and the plaster is also affected, please use PENETROX. This is stabilised and suitable for absorbent surfaces. However, depending on the depth of penetration or the material, it may have to be removed and deconstructed.

Which active ingredient is suitable for mould treatment of wood?
For wood, PENETROX is the standard agent. PENETROX is stabilised, penetrates the surface and thus has a deep-penetrating effect. However, if the mould has grown very deeply into the wood, the component must be renewed.

What is the difference between PENETROX and MAXOX-DF?
PENETROX and MAXOX-DF have almost the identical composition of ingredients. PENETROX is suitable for surface treatment and MAXOX-DF for room volume. PENETROX can be applied with a brush, a spray bottle or a ULV sprayer. MAXOX-DF, on the other hand, can only be fogged with a thermofogger or pulsjet fogger.

Can we fog vehicles, rooms, etc. with PENETROX without hesitation and use them again after a short time? Or do upholstery, floors, etc. have to be covered beforehand and completely wiped down later (also with regard to the bleaching effect)? Can we thus disinfect our employees' vehicles in a very short time? Can we also disinfect our offices?
We recommend fogging your vehicles and your business premises with MAXOX-DF and wiping down relevant objects such as door handles, counters or desks with ALRON CITROX or PENETROX. With MAXOX-DF, there is no need to worry about bleaching. With PENETROX you cannot fog, but only use the ULV sprayer or hand wipe method. The risk of bleaching in textiles cannot be excluded. In the wiping process, the problem of bleaching occurs less because the surfaces are wiped off again and thus no high concentration remains on the object.