ODOX – oxidant
Oxidising and disinfecting agent for odour control. Neutralises foul odours, fish and smoke smells, kills bacteria, mould and viruses. Odox oxidises and neutralises foul smells, fish smells and smoke smells and kills bacteria, moulds, fungi and viruses. Testing according to DIN EN14476 confirms a virucidal effect of the agent. Odox is a stabilised liquid hydrogen peroxide solution and an effective oxidising and disinfecting agent. Odox should always be used first in oxidative odour control (before hypochlorite and ozone).
APPLICATION: Before treatment, make sure that the fabric to be treated is waterproof and resistant to the bleaching action of Odox. Use Odox undiluted on bleach-resistant fabrics. For stain removal and treatment of bleach-sensitive fabrics, dissolve Odox in 3 parts of water. Dampen the fabric with the Odox solution and allow to dry. Apply with a ULV sprayer. Use biocides and active ingredients with care!
Listed by the Federal Institute for Occupational Safety and Health, Registration number: N-70235. Best before 24 months after date of manufacture.
CAUTION: Causes severe eye irritation. Keep safely out of reach of children. If medical advice is needed, have packaging or label at hand. Wear protective gloves/eye protection. Wash thoroughly with water after use. If eye irritation persists: seek medical advice or attention. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.
Heylo disinfectant and odour eliminator made by Alron: for professional fire and water damage cleaners.
Note: Read the safety data sheet and technical data sheet before use!
Frequently asked questions (FAQs) on the subject of disinfection
Are your active substances only suitable for disinfection?
No. They can be used for disinfection, odour neutralisation and also mould remediation.
Do your active substances eliminate viruses?
Yes. All Heylo disinfecting agents have a limited virucidal effect.
Can Heylo oxidising agents be used for hand disinfection?
No. The products are not suitable for use on humans or animals.
Are your active ingredients approved for mould remediation?
Yes. All biocide products must be approved by the BAUA (Federal Institute for Occupational Safety and Health).
Which mould treatment do I use to kill spores on wallpaper?
For superficial, visible mould infestation, the agents ODOX and ALRON CITROX are suitable. However, as soon as the wallpaper has grown through and the plaster is also affected, please use PENETROX. This is stabilised and suitable for absorbent surfaces. However, depending on the depth of penetration or the material, it may have to be removed and deconstructed.
Can ODOX or CITROX be fogged?
No. All our active substances that are suitable for fogging have the designation "DF" after the active substance name. DF stands for DRY FOG.
Effective oxidant and disinfectant for odour control
Fights bacteria and viruses
The active substance is virucidal, tested according to DIN EN14476
Stabilised liquid hydrogen peroxide solution
Does not form harmful by-products
Leaves no residues
Damp fogging for large areas
ULV sprayer for the generation of a moist mist. Fogging of small quantities of active ingredient over large areas.
Oxidising agent and cleaning agent
Cleaning agent dissolves limescale, soap residue and rust stains. Kills mould fungi. Removes black mould stains on smooth, non-absorbent surfaces.
Discover how to effectively disinfect and deep clean homes.
How to remove the smell of smoke and odours from your home.
Enquire about this product
Complete your details below and the right person from our expert team will get back to you.
For service and spare parts enquiries please include serial number and product type in the Message field.