Condensation dehumidifiers

A condensation dehumidifier works by drawing moisture-laden air across a refrigerated evaporator coil inside the unit. This rapidly cools the air below its dew point, and the condensation is collected. The cooled air is then passed across the condenser where it is reheated and returned to the room at a lower relative humidity.

Using a condensation dehumidifier can keep humidity levels in an indoor space at a comfortable, safe level at all times, regardless of the surrounding climate. This can help to:

• Prevent mould and mildew growth

• Restore items following water damage

• Make spaces more comfortable for occupants

• Improve overall air quality

• Address odours caused by damp

Condense dehumidifiers also offer several advantages over adsorption dehumidifiers. They are often easier to install and operate, more cost-effective to run, and present a very low risk of “over-drying” an environment.

Learn more about deciding between a condensation dehumidifier and adsorption dehumidifier.

Yes. By removing excess moisture from the air, a condensation dehumidifier can help to reduce musty odours caused by dampness.

If fitted with filters, UV lights or other means of air purification, a condensation dehumidifier can improve air quality by removing pollutants and particles from the air.

By addressing high levels of humidity, these dehumidifiers also make areas more comfortable to inhabit, and remove the excess moisture that allows mould and mildew to grow and spread spores into the air.

Condensation dehumidifiers are effective for a wide range of residential and commercial settings and applications. These include:

• Water damage restoration

• Construction drying

• Preservation of products and archives

• Data centres

• Laundry drying

• Food production

• Swimming pools

• Waterworks

• Cellars

• Heritage sites and listed buildings

• Museums and galleries

Condensation dehumidifiers are more energy efficient than adsorption models in higher temperatures.

However, how efficient a dehumidifier is will depend on how the unit is manufactured and the components used. Ideally, you want to prioritise dehumidifiers that use EC fans and MID-compliant energy meters, and can effectively recover heat energy as part of the condensation process.

Speak to our experts about the efficiency of our condensation dehumidifiers.

Calculating the correct size of a condensation dehumidifier can be a challenge, and will be influenced by numerous factors, such as:

• Meteorological data

• Room size

• Air change requirements

• People in the area

• Products in the area

• Type and age of building materials

Our bespoke, expert-driven consultations ensure that you are always advised on the ideal-sized dehumidifier for your requirements. Get in touch with our team today and let’s get started.

The best condensation dehumidifier will vary depending on your intended application, the environment they will be used in, and the climate you want to maintain.

For advice on the right dehumidifier for your application, get in touch with one of our 600 Dantherm Group experts, or read our helpful selection guide.

For all of our condensation dehumidifiers, VAT-registered companies can get a quote very quickly by pressing 'I want to buy' and inserting their enquiry and contact details.

However, you cannot carry out the entire purchasing process on our website. This is because due to the dehumidifier you wish to purchase and your area of residence, you may or may not need to buy through a local Dantherm Group representative. We will facilitate this when you use the 'I want to buy' button for the dehumidifier of your choice.

Yes, we can fulfil bulk orders across our range of condensation dehumidifiers. Get in contact with our experts or go direct to your local Dantherm Group representative to discuss the exact needs of your project and how we can meet your requirements.

At Dantherm Group, we pride ourselves on ensuring all solutions we supply are tailored to your precise needs. Our decades of experience and total control over the design and manufacture of our range of condensation dehumidifiers means we can provide you with bespoke, technical advice to ensure you receive the most efficient, effective and sustainable solution.

Reach out to our experts for a free, specialist consultation about your specifications so we can advise you on the most suitable unit.

This depends. For some standard condensation dehumidifiers, as well as their accessories and consumables, we offer day-to-day delivery. Larger or more complex orders will likely have a longer lead time.

For detailed information on when you can expect to receive the solutions you are interested in, please reach out to your local Dantherm Group representative.

No. All Dantherm Group condensation dehumidifiers included on this website are sold only to industry professionals either directly or via our extensive network of suppliers.

Yes. We have dedicated offices, suppliers and servicing partners based across Europe to provide timely, ongoing support across our entire range of condensation dehumidifiers. You can get in touch through our contact form and we will make sure your enquiry is handled by the office or service partner best suited to your needs.

We also have an extensive network of spare parts dealers throughout Europe, who are geared to provide you with a complete stock of spare parts for your dehumidifiers. We are committed to catering to your needs and getting you the required parts as quickly and easily as possible.

If you would like to become a supplier of Dantherm Group condensation dehumidifiers, please refer to our Supplier Code of Conduct.

Get in touch with our team via email or over the phone if you have an enquiry, and we will get back to you at our earliest convenience.