Produkty
- Strona główna
- Produkty
- Simplify
- Simplify Sensor Probe – Indoor Air Quality
Simplify Sensor Probe – Indoor Air Quality
Simplify Sensor Probe – Indoor Air Quality is part of the Simplify solution. The probe is measuring the quality of the air using TVOC (Total Volatile Organic Compounds) in the unit μg/m³ (microgram/m³).
The probe is designed for monitoring indoor air quality (IAQ) by detecting Total Volatile Organic Compounds (TVOC). Both TVOC and the more familiar gas carbon dioxide (CO2 ) are among the factors in IAQ, and both are emitted by humans. Since CO2 is better understood by the general public than TVOC, the Simplify Sensor Probe – Indoor Air Quality comes with a method of estimating CO2 . The correlation between TVOC and the CO2 - concentration has been investigated for indoor environments and implemented in algorithm libraries.
The probe will adjust to the local indoor air climate in two steps. First 10 minutes a calibration is performed to background levels. After the calibration the probe will be fully acclimatized after 48 hours. Total analysis of the indoor air quality is visualized on a IAQ scale from 0 to +5, where 0 indicates extremely good indoor air quality and +5 indicates bad indoor air quality.
The IAQ scale is defined according to UBA (The German Environment Agency). Third party reports available on request.
Applications
-
Analysis of indoor air quality in buildings
-
Measurement of TVOC (Total Volatile Organic Compounds)
-
Measurement of eCO₂, where people are present
Główne cechy
-
Slim design Ø8mm
-
IP 67
-
Cable length 240mm
-
Rugged design
-
TVOC and eCO₂
-
IAQ index according to UBA (The German Environment Agency)
Installation
-
The Simplify Sensor Probe – Indoor Air Quality is part of the Simplify solution. It is connected to the Simplify Sensor Box to measure indoor air quality (TVOC – Total Volatile Organic Compounds) and eCO₂.
-
The Simplify Sensor Box is automatically powered ON, when the probe is connected.
-
The probe is connected to the Simplify Sensor Box via a mini DIN connector.
Specyfikacja produktu
Voltage
Current active/sleep
Power average
TVOC range
Tolerance TVOC
Resolution TVOC
eCO2 range
Tolerance eCO2
Resolution eCO2
IAQ range
Tolerance IAQ
Resolution IAQ
Temperature range
Protection class
Odpowiednie dla
Pliki do pobrania
Simplify technical guide
Simplify commercial product guide
Simplify quick installation guide
Simplify user manual
Simplify QR-Code quick guide
Produkty powiązane
Zdalne sterowanie
Jednostka sterująca Simplify jest kontrolerem systemu zdalnego monitorowania Simplify.
Zdalna kontrola klimatu
Mobilne rozwiązanie do zdalnej kontroli klimatu oparte na chmurze
Zdalne sterowanie
Aplikacja Simplify jest konieczna w celu korzystania z systemu Simplify.
Zdalne sterowanie
Uproszczony pulpit nawigacyjny jest częścią rozwiązania Simplify.
Zdalne sterowanie
Sonda Simplify jest częścią systemu Simplify.
Zdalne sterowanie
Skrzynka integracyjna Simplify została specjalnie zaprojektowana do integracji osuszaczy CDT z systemem Simplify.
Remote monitoring control system
Simplify Sensor Probe – Resistive is part of the Simplify solution.
Istotne artykuły
Zapytaj o ten produkt
Uzupełnij poniżej swoje dane, a odpowiednia osoba z naszego zespołu ekspertów skontaktuje się z Tobą.
W przypadku zapytań dotyczących serwisu i części zamiennych w polu Wiadomość należy podać numer seryjny i typ produktu.