Simplify Integration Box
The Simplify Integration Box is specially designed for integrating the CDT dehumidifiers to the Simplify solution.
When installed inside the CDT, the Simplify Integration Box enables temperature, humidity and power consumption data from the CDT being transmitted to the Simplify Dashboard. The Simplify Integration Box gives a full picture of the status of the CDT, the kW´s and KWh’s used by the dehumidifier.
Also alarm indications from the CDT such as “full water container” and “technical” faults are transmitted to the Simplify Dashboard giving the user a full view of the CDT´s operational functionality on site.
The Simplify Integration Box makes it possible to turn the dehumidifier on and off from the Simplify Dashboard.
The Simplify Integration Box is easily installed inside the CDT and connected to the dehumidifier control by the RJ11 cable.
Simplify Integration Sensor
|
Simplify Integration Sensor
|
How to program Simplify Climate Solutions
|
How to install the Integration Box into a Dantherm CDT dehumidifier
|
How to insert batteries into Sensor Boxes
|
How to end and archive a job
|
Applications
-
Inside the CDT to receive data from the dehumidifier and control it from remote
Caratteristiche principali
-
The Simplify Integration Box sensor transmits humidity, temperature from the sensor installed in the CDT and power consumption (kW and kWh) to the Simplify Dashboard
-
Flexible upload frequency of data
-
Turn the CDT on and off from Simplify Dashboard
-
Wireless 868 MHz link to Simplify Control Unit
-
Mounted inside CDT using powerful magnet
Installation
-
The Simplify Integration Box is part of the Simplify solution
-
Using the Simplify App and scanning the Simplify Control Unit QR code, it is possible afterwards to connect an indefinite number of Simplify Integration Boxes (CDT dehumidifiers) by scanning the QR code on the unit and naming it, thereby creating a network of dehumidifiers on site
-
The dehumidifiers can be controlled from the Simplify Dashboard
-
Simplify Integration Box has a powerful magnet on the rear for easy placement inside CDT
-
RJ11 wired connection to CDT controller (DC power and communication)
Dati tecnici
| Caratteristiche | Unità | Simplify Integration Box |
|---|---|---|
| Voltage |
VDC
|
9-18
|
| Current in Tx/Rx mode |
mA
|
12/5
|
| Tx power max |
mW
|
10
|
| Tx/Rx frequency |
MHz
|
868
|
| Protection class |
|
IP54
|
| Storage temperature range |
°C
|
-40 - +60
|
| Operating temperature range |
°C
|
-20 - +60
|