Dantherm HCC 360P2 – residential ventilation unit
Ceiling and wall-mounted home ventilation units
The HCC 360P2 is a unique and flexible residential ventilation solution. With only 30cm installation headroom it is ideal for installation in suspended ceilings or onto a wall, even hidden inside a closet. The unit can be electronically reversed, meaning that both air flows will be reversed. This allows the same unit type to be mounted with the inside/outside ducts connected to either the right or the left hand side of the unit. Electrical connections can be connected from either the left or the right.
Dantherm HCC 360
|
Dantherm HCC 360
|
Dantherm HCC access panel – residential ventilation unit
|
Key features
-
High efficiency heat recovery – up to 85%
-
EC fan motors with low energy consumption (low SPI)
-
Only 300mm installation headroom height is required
-
Time controlled ventilation level, based on 11 different built-in pre-programmed week programs, reducing power consumption in periods with low ventilation demands
-
Summer cooling mode
-
Fireplace mode, creating a momentary inside overpressure, to enhance chimney functionality
-
Easy-to-install and commissioning solution with built in air measure ports, for easy balancing with PC-Tool
-
Electronically left/right fan direction switching, allowing same unit type to adapt any physical installation requirements, regardless of ceiling and wall selection
-
TCP/IP ModBus connection, for inter-operation with Building Management System
-
Electrical connections can be connected from either the left or the right.
Product specifications
| Specifications | Units | HCC 360P2 |
|---|---|---|
| Max. achievable flow at 100Pa |
V100Pa| m³/h
|
360
|
| Max. declared flow at 100Pa |
Vmax.rated| m³/h
|
220
|
| Recommended operating range |
V | m³/h
|
50 - 220
|
| EN 13141-7 referensflöde vid 50Pa |
VREF | m³/h
|
154
|
| Performance | ||
| Thermal efficiency EN 13141-7 at reference flow |
ηEN | %
|
88
|
| Leakage (external and internal) according to EN 13141-7 |
class
|
<2% (Class A1)
|
| Filters in accordance with ISO16890 |
-
|
ISO Coarse 75% (optional on supply: ePM1>50%)
|
| Filters in accordance with EN779 |
-
|
G4 (optional on supply: F7)
|
| Installation surrounding temperature range |
tSURR | °C
|
+12 to +40
|
| Maximum humidity in extract air at 25°C |
RH %
|
55
|
| Outdoor temperature range without preheating installed |
tODA | °C
|
-12 to +45
(The use of the preheating coil is recommended at outdoor temperatures below -3°C to ensure balanced ventilation)
|
| Outdoor temperature range with preheating installed |
tODA | °C
|
-15 to +45
|
| Cabinet | ||
| Dimensions (without wall bracket) |
w x d x h | mm
|
600 x 279 x 1122
|
| Spigots/duct connections |
Ømm
|
125 – female
|
| Weight |
kg
|
34
|
| Heat conductivity – polystyrene insulation |
λ | W/mK
|
0.031
|
| Heat transfer coefficient – polystyrene insulation |
U | W/m2K
|
<1
|
| Drainage hose (accessory) |
Ø | "
|
½
|
| Cabinet colour |
RAL
|
galvanized metal grey
|
| Fire classification of the polystyrene insulation |
|
DIN 4102-1 class B2
EN 13501 class E
|
| Electrical | ||
| Voltage |
U | V
|
230
|
| Maximum power consumption (without/with preheater) |
P | W
|
161/1061
|
| Frequency |
f | Hz
|
50
|
| Protection class |
-
|
IP20
|