Dantherm Group
Dantherm

Dantherm CDP 40-50-70 – swimming pool dehumidifiers

Wall-mounted/floor-standing swimming pool dehumidifiers

The wall-mounted or floor-standing CDP 40-50-70 condensation dehumidifiers have been designed to blend well with any modern pool interior. Offering energy-efficient and near-silent humidity control, the units were conceived with a view to quality and ease of operation. Combined with highly efficient fans and compressors, the advanced remote control and monitoring options contribute to cost-efficient operation and significant energy savings.

The range is also available in through-the-wall versions.

Dantherm CDP 40-50-70 – swimming pool dehumidifiers
Dantherm CDP 40-50-70 – swimming pool dehumidifiers
Dantherm CDP swimming pool dehumidifiers
Dantherm CDP swimming pool dehumidifiers
Dantherm CDP 50 – swimming pool dehumidifiers
Dantherm CDP 50 – swimming pool dehumidifiers
Dantherm CDP 70 – swimming pool dehumidifiers
Dantherm CDP 70 – swimming pool dehumidifiers
Installation of Dantherm electric heating coil for CDP dehumidifiers
Installation of Dantherm electric heating coil for CDP dehumidifiers
Installation of Dantherm LPHW heating coil for CDP dehumidifiers
Installation of Dantherm LPHW heating coil for CDP dehumidifiers
Dantherm CDP installation diagram
Dantherm CDP installation diagram
Dantherm CDP 50 spa installation
Dantherm CDP 50 spa installation

Key features

  • Low sound level
  • Low energy consumption
  • Evaporator and condenser coils are epoxy coated
  • Metal parts are powder coated before assembly
  • Optional remote control
  • Integrated control of heating and humidity (ON/OFF)
  • BMS Communication (Modbus RS485)
  • 230V connection

Dantherm CDP 40-50-70 dehumidifiers for humidity control in indoor swimming pools are developed with a focus to quality, functionality and energy saving. Highly efficient fans and compressors, combined with a new advanced remote control and control options, contribute to cost-efficient operation and significant energy savings.

The CDP is an energy efficient and quiet pool dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. When passing through the evaporator the air is cooled down to below its dew point temperature, and its content of water vapour is condensed into water, which falls into the drip tray and then is led from the drip tray to a drain. The cold, dry air is then passed over the condenser coil where it is re-heated, before leaving the unit at a temperature, which is approx. 5°C higher than at the inlet. Built in electronic hygrostat and thermostat. Active, demand controlled defrosting.

Product specifications

Specifications Units CDP 40
Operating temperature range
°C
10-36
Operating humidity range
% RH
40-100
Dehumidification @ 30°C/54% RH
l/24h
34
SEC @ 30°C/54% RH
KWl
0.47
Air flow
m³/h
400
Sound pressure level
dB(A)
46
R407c gas weight/CO2 equivalent
kg/t
0.7/1.24
Power supply
V/Hz
230/1ph/50
Product size (w x d x h)
mm
1010 x 326 x 770
Weight
kg
56.5
Specifications Units CDP 50
Operating temperature range
°C
10-36
Operating humidity range
% RH
40-100
Dehumidification @ 30°C/54% RH
l/24h
52
SEC @ 30°C/54% RH
KWl
0.48
Air flow
m³/h
680
Sound pressure level
dB(A)
47
R407c gas weight/CO2 equivalent
kg/t
0.9/1.60
Power supply
V/Hz
230/1ph/50
Product size (w x d x h)
mm
1160 x 326 x 770
Weight
kg
65.0
Specifications Units CDP 70
Operating temperature range
°C
10-36
Operating humidity range
% RH
40-100
Dehumidification @ 30°C/54% RH
l/24h
69
SEC @ 30°C/54% RH
KWl
0.43
Air flow
m³/h
900
Sound pressure level
dB(A)
50
R407c gas weight/CO2 equivalent
kg/t
1.2/2.13
Power supply
V/Hz
230/1ph/50
Product size (w x d x h)
mm
1495 x 326 x 770
Weight
kg
75.5